Re: Fun with OTC 4000, and 2 questions...

[OneSS2NV@aol.com]

In a message to the List, Bruce writes:

<< Is it *lean* evrywhere?.
 FP changes are universal. >>

   it seems to be...the INT #s were up there for the whole 30 minute drive we 
took...and we checked it at WOT, cruise, and idle.  I'm gonna install the 
AFPR tomorrow, and report back my findings, since I still have the OTC.

And suggested about my TPS volts at WOT...

<< I'd first check the mechicals again.  Made sure the cable is allowing the 
linkage to go back to idle with no preload, and that at WOT the throttle 
shaft is in at WOT. >>

   Bruce, that's where the problem was.  After I had the tranny rebuilt, the 
shop never re-set the TV cable.  I re-adjusted it yesterday, and now all is 
well.  It still shifts hard at WOT, but part-throttle cruising is much 
better...no more whiplash on the 1-2 shift.

    Thanks again,
        Steve Ragusa
         North Jersey
      '85 TPI Monte SS
        '96 Impala SS
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org