|
Standard Brand Electronics (Long Island, NY),
has a suppliment to their main catalog that has a pic reference, might try
calling some local parts stores, and see if they have it.
Grumpy
----- Original Message -----
Sent: Wednesday, March 15, 2000 1:35
PM
Subject: MAP sensors
I have mounted the TPS and IAC to the TB for the
the Caddy(Olds) analog fuel injection(still need 1" ID spring 2" long). The TB
has a small diameter port that the MAP sensor attaches to. the only MAP sensor
I have seen a picture of is the one for TPI (little box looking thing). Near
as I can tell the analog setup had the sensor in the ECU box (can't find it on
the harness anywhere). Where can I find pictures of the various map sensors?
(or are all the GM ones the same?) my concern is to mount it so that I don't
get RFI or vibration induced errors. Is the TPI MAP sensor mounted on the
manifold(TB) or is it remoted?
byE
Mike (slow as molasses)
|