[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: A few lt1 ?'s

To: <gmecm@diy-efi.org>
Subject: Re: A few lt1 ?'s
From: "Mike" <itsmike@lvcm.com>
Date: Sun, 14 May 2000 11:06:00 -0700
References: <007b01bfbc85$d4926760$023eea18@lvcablemodem.com> <4.3.2.20000513131045.00a72c50@in.epix.net> <004301bfbd53$910c4960$023eea18@lvcablemodem.com> <391E850D.73C0FC93@surfree.com>
Reply-to: gmecm@diy-efi.org
Sender: owner-gmecm@lists.diy-efi.org

The vss output from the pcm is different how? Does it send voltage every
pulse or what? And does the vss send voltage every pulse?

Mike
> Mike,
> The VSS output is 40 pulses per driveshaft revolution, so it should
> work fine. Be careful how you interface. The VSS signal is a
> differential signal.
>
> Ken
>


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org

Follow-Ups:
- Re: A few lt1 ?'s
  - From: Ken Kelly <PCMdoc@surfree.com>

References:
- A few lt1 ?'s
  - From: "Mike" <itsmike@lvcm.com>
- Re: A few lt1 ?'s
  - From: Len sabatine <sabatine@epix.net>
- Re: A few lt1 ?'s
  - From: "Mike" <itsmike@lvcm.com>
- Re: A few lt1 ?'s
  - From: Ken Kelly <PCMdoc@surfree.com>

Prev by Date: Re: 7749 ECU PW musings.....
Next by Date: Re: Whatsa 2732DC?
Previous by thread: Re: A few lt1 ?'s
Next by thread: Re: A few lt1 ?'s
Index(es):
- Date
- Thread